weber pearl armor

Translucent Epoxy Grout-Weber Pearl Armor

weber pearl armor is a two-component, high performance 100% solid epoxy based tile/stone filler which allows light to pass through the grout itself to create a unique reflective appearance. 


Wall, Floor

Available in 1kg and 5kg packs.


  • 1 kg bucket
  • 5 kg bucket

To know before applying

Mixing ratio

Part A: Part B - 11.5 : 1 by weight

Part A: Part B - 7 : 1 by volume

Consumption calculator

Please fill in the empty fields

Sorry, there was an error with the selected options

This calculation is approximative.
Total weight :
Bag quantity :
Palette quantity :

Documentation and brochures

Features and benefits

  • Highly dense, even, compact and a smooth finish results into nonabsorbent, water resistant surface which prevents the growth of bacteria and fungus.
  • Easy to mix with a creamy consistency which helps in faster application and ease in cleaning.
  • Very low in shrinkage and high resistance to cracks.
  • Excellent chemical & stain resistant properties.
  • No-sag resistance formula for wall & floor applications.
  • High mechanical strength which results in long durability of the grouts.
  • It can resist most of commercial cleaners which are used regularly for cleaning tile and stone.
  • Two components pre weighed & ready to mix.
  • Being translucent in nature, it can be used for fixing glass blocks and areas were background light is desired which cannot be achieved with a cementitious & resin adhesive.
  • Very low in volatile organic compounds which allows it to be to be used in green buildings
  • When applied in between tile and stone will result in invisible grouts unlike cementitious and common epoxy grouts.
  • High bonding strength with tiles and stones.
  • High translucency increases the chromatic effect resulting into highly aesthetic and decorative finish.
  • It can withstand heavy traffic and weathering conditions.
  • No color shading even when used in wet and submerged conditions..


  • Can be used where minimum joint width is 1 mm.
  • Can be used where maximum joint width of 7 mm in vertical and 14mm in horizontal.
  • Do not use the grouts in industrial aggressive chemical prone areas and the areas which are subjected to aggressive cleaning with pressure or steam cleaning.
  • For at least 7 days days after grouting, for acid cleaning & submerged conditions