Weber Internal Waterproofing Solutions
When water spoil Interior .... we guard it......
Water is regularly used in the washroom, wet areas, kitchen areas. Though these areas are covered with a protective layer of tiles, water can seep through corners, tile joints and ultimately damage the mother slab. These damages are seen over a period of time and hence this area demands special care and attention for waterproofing treatment on mother slab.
Weber Internal Waterproofing System
Whether you are craftsmen, distributors or building specifiers, Weber supports you on a daily basis. Find the answers of our experts to the questions you ask yourself on your sites
Internal Waterproofing Solution
All corners of the floor must be filled with cement sand mixture modified with polymer-like webertec SBR so as to have a curved surface. This ensures water does not accumulate on the edges which are susceptible to leakage.
Alternatively, edges can be reinforced with corner treatment tape - weber Stickon. Apply weberdry ACR Seal on edges with a brush and place weber Stickon firmly so that half of it covers the wall and rest covers the floor. Apply another coat of weberdry ACR Seal over this completely covering weber Stickon and its edge.
Generally, 2-3 coats of 0.5 mm thick waterproofing membrane must be applied for durable waterproofing. The second coat must always be applied perpendicular to the 1st coat.
Primer penetrates into pores of the concrete and enhances adhesion of subsequent coat with base substrates. It also improves coverage.
We recommend scrapping loosely held concrete, wetting the surface with ample quantity of water and apply two liberal coats of weber moistseal. Putty and paint can be applied after 2 days of drying.