weber knight armor

Mixing ratio

Part A: Part B - 11.5 : 1 by weight

Part A: Part B - 7 : 1 by volume

• It can be used as green building products since it utilizes the natural energy to provide luminance in dark for pedestrian movement with a high aesthetic appeal.
• The non-sag formula for wall & floor applications.
• High bonding strength with tiles and stones.
• Joints with weber knight armor are resistant to most of the commercial tile & stone cleaners.
• Non-absorbent i.e. water-resistant joints prevent the growth of fungus and bacteria.
• Two components, ready to mix, ensure consistent quality of grouts.
• Very low shrinkage and high resistance to cracks.
• Easy to mix, creamy consistency, faster in application and ease in cleaning to get smooth & decorative finish.
• Excellent chemical & stain resistance properties.
• High mechanical strength allows usage in high foot traffic areas, open parking & vehicle movement.
• It can be applied in between the tile & stone under submerged condition due to its water-resistance properties.
• It can also be used as adhesive for fixing transparent glass tiles & blocks.
• Minimum exposure of light intensity at joints required from 300-1000 lux to get visible luminance for more than 5–8 hours and luminance been tested as per international standard.
• High translucence with coated pigment increases the chromatic effect resulting in the highly aesthetic and decorative finish.

• Minimum joint width of 1 mm.
• Maximum joint width of 7 mm in vertical and 14 mm in horizontal.
• Not to be used in industrial aggressive chemical prone areas and the areas which are subjected to aggressive cleaning with pressure or steam cleaning.
• At least 7 days after grouting for acid cleaning & submerged conditions.
• The luminance performance would be affected if the joints are not exposed to daylight or household light.
• The joints look white during day time irrespective of the colour of the tile.