weber shine armor

Packaging
- 1 kg bucket
- 5 kg bucket
weber shine armor is a two-component, 100% solid, glitter based reaction resin epoxy grout which is acid-resistant. The glitter component is premixed with the resin base which results in a consistent, uniform and highly aesthetically finished joints after application.
- Enhances asthetics
- Easy to use
- Chemical resistant
- Stain resistant
- Anti bacterial
- Water repellant
- High bond strength
Support
Wall, Floor
Colors
Mixing ratio
Part A: Part B - 11.5 : 1 by weight
Part A: Part B - 8 : 1 by volume
- Glitter component is premixed to avoid mixing at the site. This results in consistent, uniform & highly aesthetically finished joints.
- The glittering effect is higher due to reflective filler & transparent resin enhances decorative and durable joints.
- Easy to mix with a creamy
consistency which helps in faster application and ease in cleaning. - Available in attractive & decorative colours.
- High sag resistance formula and thixotropic. Can be used for both floor & wall applications.
- Excellent stain & chemical resistance properties.
- Very low in
shrinkage and high resistance to cracks. - Non-absorbent and water-resistant joints prevent the growth of bacteria and fungus.
- Minimum joint width of 1 mm.
- Maximum joint width of 7 mm in vertical and 14mm in horizontal.
- Do not use the grouts in industrial aggressive chemical prone areas and the areas which are subjected to aggressive cleaning with pressure or steam cleaning.
- At least for 7 days after grouting for acid cleaning & submerged conditions.